50% OFF

RESIDENTIAL WATER HEATER SERVICE PLAN

One thing we have learned over the years is that Water Heaters need Servicing. like a car needs Servicing, you will get the best performance and longevity out of an expensive piece of equipment. Many home owners know this, but since your Hot Water Tank is quite often out of sight, and life gets busy, it is quite often overlooked. We recommend an annual service

Services

Here is what you will get for as little as $75.00

1

A Professional Visual Inspection of your Hot Water Tank Plumbing Assembly

2

Removal of the Sacrificial Anode Rod and report on the Rate of consumption

3

Log the water pressure in the system

4

Inspect and check the air pre-charge in your expansion tank, and bladder integrity

5

Flush out your Hot Water Tank

6

Measure the temperature of your hot water

We will do the above  6 point inspection for you at 50% off our regular price.

visual inspection

A visual inspection will determine if your hot water heater has the necessary components to meet the present B.C. Plumbing Code. Is there an Emergency Floor Drain?

Anode rod

Your Anode rod is the best indicator of the health of your Hot Water Tank. When your Anode is depleted, your Hot Water Tank rate of Corrosion is Accelerated.

water Pressure

Your water Pressure directly affects your water piping, and plumbing fixture’s. It should not exceed 80 p.s.i. as per B.C. Plumbing code, and fixture design. Many low lying areas close to sea level have water pressures in excess of this for reasons of distribution. Every home has a Pressure Reducing Valve to moderate this pressure to acceptable levels. Is yours working?

expansion tank

Your water system is a closed system, meaning there can be no backflow into the main distribution system. It also means that as water is heated, it will expand and increase your house pressure. This is why expansion tanks or pressure relief valves are installed. The air chamber in the expansion tank compresses, absorbing excess volume created by hot water expansion. The pressure relief valve offers the same protection by dumping excess water volume to a drain. It will release at a lower pressure than the Combination Temperature Pressure Safety Valve also on your Hot Water Tank.

Flushing Hot Water Tank

Flushing sediments from your Hot Water Tank Optimizes Efficiency

water temperature

Your Hot water temperature is a measure for safety and comfort

anode rod Inspection

If something is not up to code, you may receive recommendations for maintenance work. You are under no obligation to use our services. However, most maintenance can be done at the time with no further appointment’s, and at a reasonable cost.

Some conditions pertaining to your anode rod removal may cost extra if it is not readily accessible.

Get Started

Schedule An Appointment
Or Get an Online Quote

Talk to a plumber

Message Us

eddyvan@roundaboutplumbing.ca

Get an Online Quote

Get Started